The starter motor must be in good condition to begin any automobile, especially a large one just like the Ford Explorer. Putting in a brand new starter in the Explorer’s engine means disconnecting and eradicating the old starter. You’ll need to entry the starter from beneath the truck in most cases. The process can vary for fashions made prior to 2002, so examine along with your mechanic.
Ford Explorer Starter Motor Installation Instruction
1. Disconnect the black cable on the truck battery’s negative terminal.
2. Elevate the front end of the truck and help it on jack stands.
3. Pull off the protecting cover on the current starter’s solenoid terminals and wires. Loosen the nuts on the terminals with a wench and disconnect the wires.
4. Take away the present starter-mounting bolts with the wrench and withdraw the starter motor from the engine.
5. Set up the alternative starter motor in place of the old one and apply the mounting bolts. Join the wires to the solenoid terminals utilizing their nuts after which cowl the terminals with the protecting covering.
6. Lower the Explorer off the jack stands.
7. Reconnect the negative cable to the battery.